THERMOCOL CUTTING MACHINE

    HI FRIENDS, WELCOME TO  TECH. TODAY WE'RE GONNA DO A FOAM CUTTING MACHINE. WE CAN USE IT TO CUT THE THERMOCOLS IN DESIGN. TODAY THE LIGHT IS LOW HERE AND IS A BIT DARK DUE TO RAIN. THAT'S WHY WE'RE USING LIGHT. THERE MIGHT BE SOME ISSUE WITH LIGHT IN THE VIDEO. BEFORE ENTERING INTO THE VIDEO, THERE MIGHT BE FEW PEOPLE WHOM WE LOVE THE MOST. THAT MAY BE PARENTS, FRIENDS OR ANY PERSON. IN ORDER TO SHOW YOUR LOVE, WE WILL GIFT THEM SOMETHING. A GOOD OPTION FOR GIFTING IS THIS WEBSITE FORMYLOVE.IN. THE SERVICE THEY OFFER ARE, CUSTOMISED PHOTO PRINTING ON ACRYLIC FRAMES, 3D MOONLAMP, 3D CRYSTALS, WOODEN FRAME, LED CUSHION, DIGITAL PAINTING ETC. THERE ARE PRODUCTS RANGING FROM 300 TO 3000 RUPEES.

 THEY'RE OFFERING 52% DISCOUNT. THE WEBSITE LINK IS IN THE DESCRIPTION BOX BELOW. YOU CAN CONTACT THEM IN THESE NUMBERS AS WELL. LET'S GO TO THE WORKSHOP!   LET'S START OUR WORK AND WE NEED 30X20 CM PLYWOOD SHEET. WE'RE PIERCING A HOLE IN THE MIDDLE. THEN WE TIGHTEN IT WITH A SMALL SCREW. WE'RE USING A SMALL SCREWDRIVER TO SLOWLY TIGHTEN IT. WE'VE TAKEN 20 CM AND 30 CM PLYWOOD PIECES. WE'RE MAKING A SMALL STAND WITH THIS. IN THIS LEVEL IS WHAT WE'RE GONNA MAKE. THERE IS NO PARTICULAR POSITION TO KEEP THIS.   WE'VE STUCK IT IN 'L' SHAPE. ON THE EDGE OF IT, WE'RE PIERCING A SMALL HOLE AND WE'RE GONNA PUT A SCREW IN IT. WE CAN INSERT IT IN THAT HOLE AND TIGHTEN IT. WE'VE TIGHTENED IT.   

NOW OUR 'L' SHAPED STAND NEEDS TO BE STUCK ON THE PLYWOOD. WE'RE USING GLUE TO STICK IT. NOW WE'RE TAKING A SMALL WIRE AND STRIP THE EDGE. THEN WE'LL TIE IT ON THE SCREW LIKE THIS. AFTER THAT, WE NEED TO BRING IT DOWN. SO WE'RE GONNA STICK IN THE SAME 'L' SHAPE. WE'LL BRING IT LIKE THIS. SIMILARLY WE'LL TAKE ANOTHER PIECE AND TIE IT ON THE SCREW BELOW. EVEN THE EDGE OF THE WIRE SHOULD BE STUCK. BOTH ARE PLACED IN SAME POSITION. NOW WE NEED A NICHROME WIRE. WE'VE TAKEN THE LIGHTEST NICHROME WIRE. WE BOUGHT IT ONLINE. ON THE SCREW BELOW, WE'LL TIE THE NICHROME WIRE AND LOCK IT. AFTER 2-3 ROTATIONS, IT WILL BE LOCKED. WE NEED TO TIGHTEN THE REMAINING ON THE TOP SCREW. BEFORE THAT WE'VE A SMALL WORK. WE NEED TO MAKE A STAND FRAME. FOR THE STAND, WE'VE TAKEN 4 SMALL PIECES OF PLYWOOD. WE'RE STICKING IT HERE. ON TOP OF THAT WE'LL DO ONE MORE PLATFORM. WE'VE TAKEN A PLATFORM LIKE THIS. 

IN THE CENTER THERE IS A HOLE. INSERT THE NICHROME WIRE IN THIS HOLE. SINCE IT IS VERY LIGHT, IT IS VERY DOUBTFUL TO SEE IN CAMERA. THE REASON WHY WE TOOK A LIGHT ONE IS TO IMPROVISE THE EFFICIENCY.   WE'VE KEPT THE PLATFORM ON THE STAND. ON THAT, WE CAN APPLY SOME GLUE. WE KEPT 4 BLOCKS AS STAND AND STUCK THE PLATFORM WITH GLUE ON IT. WE'LL TAKE THE NICHROME WIRE VIA THAT HOLE AND LOCK IT ON THE TOP SCREW. THE CONNECTION IS COMPLETE. WE'VE CLIPPED ON A 9V BATTERY. ALSO WE'VE SET A SWITCH ON THE WIRE. WE CAN TAKE THIS AND SOLDER IT WITH BLUE AND BLACK WIRE. BEFORE THAT WE'VE STUCK THE BATTERY & CLIP NOW WE CAN SOLDER THE WIRES. SO WE'VE SOLDERED ON ONE SIDE. SIMILARLY WE'VE SOLDERED ON THE OTHER SIDE AS WELL. THIS IS THE FOAM CUTTER AND THE MAKING PROCEDURE. WE CAN TEST IT NOW. WE'LL RUN IT ROUGHLY ONCE. WE CAN SEE IT EASILY CUTS. I'LL SHOW THE OUTPUT. WE JUST CHECKED IT ROUGHTLY. SEE, IT IS EASILY CUTTING DOWN.   

SEE HOW EASY WAS IT TO CUT. WE'VE DRAWN A STAR SHAPE. WE CAN TRY THIS ONCE. THIS I DID IN SUDDENLY. IF WE NEED A PERFECT ONE, WE CAN DO IT SLOWLY. THIS IS DONALD DUCK DRAWN BY PRAVEEN. WE CAN CUT THE FRAME ALONE. WE CAN EASILY DO IT.   SINCE WE'RE USING IT FOR FIRST TIME, IT'S SHAKING. IF WE DO IT ONCE OR TWICE, WE CAN DO IT WELL.