Homemade Grass Cutting Machine

    Hi Friends, Welcome to Tech. Today we've made a grass cutting machine. We've made a simplest version that can be made. I saw a video in Facebook, a guy was using this to cut grass. After searching a lot, still couldn't find his name. This thing we've made to help people who see this in YouTube. This can be made simple and yet powerful.   

So let's go to our workshop. To our workshop! We're starting out work. We need this grinder, this is used to cut down metal. Need to remove this wheel first. With this spanner, we can remove it. This wheel is not required. Wheel is removed and the above that you can see the nut. Next we need a nylon cable. Available in hardware shops. For 1m, it's 10 rupees. Usually used to tie around and in grass cutting machine this is what is used. We're cutting a piece in this level. Cutting it with a help of plier. We've cut down this piece. We can see how the cable is connected. We're connecting in this head. You can see 4 holes in this. Just fold this cable and insert in couple of holes. Just pull it down and tighten. Above this head, we can tighten with machine. We can tighten with hand and then use spanner. We've used hand maximum to tighten. Now we'll use the spanner. It's very tight now. 

This is the work in this machine. We need to set an handle for this machine. So we've taken a PVC pipe. It's 1.5m long. Have taken a 1-inch PVC pipe. Just keep the machine over PVC pipe and we can use the tape to hold it. Make sure the tape is stuck well. Since we don't use any other glue.       Next, we're tying another section.   Tighten it well. Or else, you'll feel shake when it's working. Also has chance to loosen up. We better tighten well. We've stuck the machine in PVC pipe. We can extend the cable till here. So we've set the machine in PVC pipe. The plug is in the top of the pipe. We're not directly plugging it. We've taken an extension board and   we're connecting it in that. Then we're tying it here. So whenever we need to switch on, we can do it here. The making procedure is complete. The machine section is ready. Control section is here. ON/OFF switch is here. 

This is the making procedure and next is testing it.   We're going to test it now. Before that for safety, we can wear a glass. Safety should be our priority. No need to injure eyes and I'm wearing pant.   So if I switch on, the machine will work. How was the video? Isn't it awesome! Our machine easily cut down grasses. We didn't get the name of the guy who did it. Whatever it is, he did a great tool. It will be very helpful. We can easily cut grass with this. Hope you all liked today's blog. Like or Dislike. Comment your feedback.